Innokin iTaste MVP 20W 2600mAh Variable Voltage Mod Black

£44.99 Original price was: £44.99.£29.99Current price is: £29.99.
Vaping Wizard
SKU: MOD Categories: , Tag:

Data sheet

Brand Innokin
Model iTaste MVP 20W
Color Black
Product Type VV
Battery Capacity 2600mAh
Material Stainless Steel
Thread Type 510
Variable Voltage (VV) Yes
Telescoping Mod No
Battery Type Fixed
Power Output 6.0~20W
Variable Wattage (VW) Yes
Charge Style USB
Weight 350g (12.35oz)
Depth 107mm (4.21 inch)
Height 107mm (4.21 inch)
Width 22mm (0.87 inch)
Shipping Type Built-in Battery

More info

MVP 20W is the newest in the line of bestselling Innokin Technology
iTaste MVP vaporizers and features a wider range of Variable Voltage and
Wattage, advanced safety features, a long lasting 2600mAh battery, Vape
while you charge technology and the MVP20W can also be used to charge
your mobile phone and other electronic devices.

The Primary Features of The MVP20W:

Variable Voltage:
Variable Voltage: can be adjustable from 3.3 volts to 7.5 volts in 0.1 volt increments.

Variable Wattage:
Variable Wattage: can be adjustable from 6.0 watts to 20.0 watts in 0.5 watts increments.

Battery Level Indicator:
The MVP 20W battery capacity is displayed via green, yellow and red LED.
Green = Almost fully Charged. When the MVP 20W fully recharged the LED light will power off.
Yellow = Half Power.
Red = Low Power. Charge the MVP 20W.

Large battery capacity:
The MVP 20W has a built-in 2600mAh polymer Li-Ion rechargeable battery.

ON/OFF battery switch:
the power button three times in rapid succession to turn on the MVP
20W. When the MVP 20W is powered on Hold down the button to activate the
atomizer and vape. When the MVP 20W is not in use, press the button
three times in succession to power off the MVP 20W Advanced Personal
Vaporizer. Always power off the MVP 20W Advanced Personal Vaporizer when
it is not being used, or when it is going to be stored in a pocket, bag
or purse.

Ohms meter:
Reads the resistance of your atomizer / cartomizer / clearomizer.

Puff Counter:
integrated Puff counter will record the number of puffs you have taken.
Either press “P” button or “U” button for 1 second to check the number
of puffs. The Puff Counter will reset to 0 whenever the device is
powered off.


10 second Cutoff:
the activation button is held for longer than 10 seconds the MVP20W
Advanced Personal Vaporizer will stop firing until the button is
released and pressed again.

Low Voltage Warning:
Red LED and Battery bar will continue blinking when the battery
capacity is lower than 3.3V and the MVP 20W Advanced Personal Vaporizer
will power off automatically.

Short Circuit / Atomizer Protection:
Circuit / Atomizer Protection protects the MVP 20W Advanced Personal
Vaporizer against shorted atomizers and will stop the unit from
functioning in unsafe conditions.

Over-Discharge Protection:
MVP 20W Advanced Personal Vaporizer monitors the battery voltage and
will automatically power off when the battery is discharged.

“Vape while charging” Technology:
MVP 20W is recharged with a Micro USB cable. When plugged into a power
source the MVP 20W can also be vaped and charged at the same time with
Innokin Technologys “Vape while you charge” pass-through technology.

Remembers last Voltage or Wattage setting:
the MVP 20W is turned off it will store the current voltage or wattage
setting and it will retain the setting when the MVP 20W is powered on.

Built-in 3 digit display:
display shows the Ohms meter, Voltage / Wattage setting and the number
of Puffs taken since last time the battery was turned off.

Portable power source for electronic products:
charge your portable electronic device with the MVP 20W: set the small
pin switch on the bottom of the MVP 20W to the ON position and connect a
micro USB cable to the USB OUTPUT port (DC 5V, maximum output current
0.5A)To maximize the battery charge of your MVP20W please ensure that
the bottom switch is set to the Off position when you are not using the
portable charger function.

Technical Specifications:

Operating Voltage: 3.3V~7.5V;
Operating Wattage: 6.0W~20W;
Standby current: 100uA max.;
Maximum output Wattage: 20W;
Maximum output Current: 6A;
Maximum output Voltage: 7.5V;
Clearomizer Resistance: 1.0 Ohm (minimum);
Battery: Built-in 2600mAh polymer Li-Ion rechargeable battery;
Charging: Micro USB DC 5V / 1000mA;
OUTPUT port: DC 5V / 1000mA


Choose Option


There are no reviews yet.

Be the first to review “Innokin iTaste MVP 20W 2600mAh Variable Voltage Mod Black”

Your email address will not be published. Required fields are marked *

You may also like…